Working Hours Monday - Friday 08:00-16:00
Toll Free 1800.899.900

To create most competitive product formulations

 

For the manufacture of sealants and adhesives, we offer a wide range of silicone based raw meterials and additives.

Silanol terminated hydroxyl functional polydimethylsiloxane silicone fluids, vinyl terminated polydimethylsiloxane silicone fluids, non-reactive linear polydimethisiloxane silicone fluids, high-purity silanes used as crosslinker, coupling agent, adhesion promoter, curing accelerator or dispersing aid, tin catalysts (Dibutyltin), liquid pigment pastes (oil based or water based), hydrophobic or hydrophilic silica powders, silicone resins (MQ resin) and other formulation components are well suited for any kind of sealant system such as RTV silicone, acrylic, polyurethane, polysulfide, MS polymer and hybrid.

Our solutions can meet every need in terms of productivity, final product performance and cost optimization, and help to formulate the most innovative and competitive products on the market.

We help you improve your products performances

 

We are a strong raw material supplier for the adhesive and sealant industries. We provide our customers with the solutions they need in terms of new formulation development or current formulation improvement to ensure the correct and efficient use of resources and to reduce costs, as well as technical support for the use of these solutions:

>  Silicone Fluid

>  Silica

>  Silane & Bonding Agent

>  Colorants & Pigment Pastes

>  Catalysts & Curing Agents

>  Silicone Resin

 

For further information about the ingredients used in Sealant & Adhesive formulations, please contact us. Our experts will assist you in making the right choices to secure the product properties you seek.

 

PRODUCT RECOMMENDATIONS


TERRAFLUID® OHP 40

Hydroxyl-Terminated Polydimethylsiloxane

(CAS No. 70131-67-8)

Silanol-Terminated Polydimethylsiloxane (commonly known as Hydroxy-Terminated PDMS, Hydroxyl Silicone Oil, or OH-Polymer) with a viscosity of approx. 40 mPa·s. It is a reactive silicone polymer consisting of a linear dimethylsiloxane chain capped with hydroxyl (-OH) groups at both ends.. It is a colorless, odorless, and transparent viscous liquid. It is highly heat-stable, deeply flexible, possesses low surface tension, exhibits excellent hydrophobicity (water repellency), and carries low toxicity.  The terminal silanol groups make it highly sensitive to condensation reactions, allowing it to easily crosslink under mild acidic, basic, or catalytic conditions. In silicone rubbers and sealants, it serves as the primary base polymer for room-temperature vulcanizing (RTV) condensation-type silicone adhesives, mastics, and industrial sealants. In coatings, it is Utilized in epoxy resin modifications, pressure-sensitive adhesives, and superhydrophobic coatings to repel moisture. In textile industry, it is formulated into textile and leather finishing emulsions to give fabrics a soft, smooth, and water-resistant handle. In cosmetics and personal care, it is frequently integrated into shampoos, conditioners, and skincare formulations as a moisturizing, emollient, and antifoaming agent.


TERRAFLUID® OHP 75

Hydroxyl-Terminated Polydimethylsiloxane

(CAS No. 70131-67-8)

Silanol-Terminated Polydimethylsiloxane (commonly known as Hydroxy-Terminated PDMS, Hydroxyl Silicone Oil, or OH-Polymer) with a viscosity of approx. 75 mPa·s. It is a reactive silicone polymer consisting of a linear dimethylsiloxane chain capped with hydroxyl (-OH) groups at both ends. It is a colorless, odorless, and transparent viscous liquid. It is highly heat-stable, deeply flexible, possesses low surface tension, exhibits excellent hydrophobicity (water repellency), and carries low toxicity. The terminal silanol groups make it highly sensitive to condensation reactions, allowing it to easily crosslink under mild acidic, basic, or catalytic conditions. In silicone rubbers and sealants, it serves as the primary base polymer for room-temperature vulcanizing (RTV) condensation-type silicone adhesives, mastics, and industrial sealants. In coatings, it is Utilized in epoxy resin modifications, pressure-sensitive adhesives, and superhydrophobic coatings to repel moisture. In textile industry, it is formulated into textile and leather finishing emulsions to give fabrics a soft, smooth, and water-resistant handle. In cosmetics and personal care, it is frequently integrated into shampoos, conditioners, and skincare formulations as a moisturizing, emollient, and antifoaming agent.


TERRAFLUID® OHP 750

Hydroxyl-Terminated Polydimethylsiloxane

(CAS No. 70131-67-8)

Silanol-Terminated Polydimethylsiloxane (commonly known as Hydroxy-Terminated PDMS, Hydroxyl Silicone Oil, or OH-Polymer) with a viscosity of approx. 750 mPa·s. It is a reactive silicone polymer consisting of a linear dimethylsiloxane chain capped with hydroxyl (-OH) groups at both ends. It is a colorless, odorless, and transparent viscous liquid. It is highly heat-stable, deeply flexible, possesses low surface tension, exhibits excellent hydrophobicity (water repellency), and carries low toxicity. The terminal silanol groups make it highly sensitive to condensation reactions, allowing it to easily crosslink under mild acidic, basic, or catalytic conditions. In silicone rubbers and sealants, it serves as the primary base polymer for room-temperature vulcanizing (RTV) condensation-type silicone adhesives, mastics, and industrial sealants. In coatings, it is Utilized in epoxy resin modifications, pressure-sensitive adhesives, and superhydrophobic coatings to repel moisture. In textile industry, it is formulated into textile and leather finishing emulsions to give fabrics a soft, smooth, and water-resistant handle. In cosmetics and personal care, it is frequently integrated into shampoos, conditioners, and skincare formulations as a moisturizing, emollient, and antifoaming agent.


TERRAFLUID® OHP 5000

Hydroxyl-Terminated Polydimethylsiloxane

(CAS No. 70131-67-8)

Silanol-Terminated Polydimethylsiloxane (commonly known as Hydroxy-Terminated PDMS, Hydroxyl Silicone Oil, or OH-Polymer) with a viscosity of approx. 5000 mPa·s. It is a reactive silicone polymer consisting of a linear dimethylsiloxane chain capped with hydroxyl (-OH) groups at both ends. It is a colorless, odorless, and transparent viscous liquid. It is highly heat-stable, deeply flexible, possesses low surface tension, exhibits excellent hydrophobicity (water repellency), and carries low toxicity. The terminal silanol groups make it highly sensitive to condensation reactions, allowing it to easily crosslink under mild acidic, basic, or catalytic conditions. In silicone rubbers and sealants, it serves as the primary base polymer for room-temperature vulcanizing (RTV) condensation-type silicone adhesives, mastics, and industrial sealants. In coatings, it is Utilized in epoxy resin modifications, pressure-sensitive adhesives, and superhydrophobic coatings to repel moisture. In textile industry, it is formulated into textile and leather finishing emulsions to give fabrics a soft, smooth, and water-resistant handle. In cosmetics and personal care, it is frequently integrated into shampoos, conditioners, and skincare formulations as a moisturizing, emollient, and antifoaming agent.


TERRAFLUID® OHP 10000

Hydroxyl-Terminated Polydimethylsiloxane

(CAS No. 70131-67-8)

Silanol-Terminated Polydimethylsiloxane (commonly known as Hydroxy-Terminated PDMS, Hydroxyl Silicone Oil, or OH-Polymer) with a viscosity of approx. 10000 mPa·s. It is a reactive silicone polymer consisting of a linear dimethylsiloxane chain capped with hydroxyl (-OH) groups at both ends. It is a colorless, odorless, and transparent viscous liquid. It is highly heat-stable, deeply flexible, possesses low surface tension, exhibits excellent hydrophobicity (water repellency), and carries low toxicity. The terminal silanol groups make it highly sensitive to condensation reactions, allowing it to easily crosslink under mild acidic, basic, or catalytic conditions. In silicone rubbers and sealants, it serves as the primary base polymer for room-temperature vulcanizing (RTV) condensation-type silicone adhesives, mastics, and industrial sealants. In coatings, it is Utilized in epoxy resin modifications, pressure-sensitive adhesives, and superhydrophobic coatings to repel moisture. In textile industry, it is formulated into textile and leather finishing emulsions to give fabrics a soft, smooth, and water-resistant handle. In cosmetics and personal care, it is frequently integrated into shampoos, conditioners, and skincare formulations as a moisturizing, emollient, and antifoaming agent.


TERRAFLUID® OHP 20000

Hydroxyl-Terminated Polydimethylsiloxane

(CAS No. 70131-67-8)

Silanol-Terminated Polydimethylsiloxane (commonly known as Hydroxy-Terminated PDMS, Hydroxyl Silicone Oil, or OH-Polymer) with a viscosity of approx. 20000 mPa·s. It is a reactive silicone polymer consisting of a linear dimethylsiloxane chain capped with hydroxyl (-OH) groups at both ends. It is a colorless, odorless, and transparent viscous liquid. It is highly heat-stable, deeply flexible, possesses low surface tension, exhibits excellent hydrophobicity (water repellency), and carries low toxicity. The terminal silanol groups make it highly sensitive to condensation reactions, allowing it to easily crosslink under mild acidic, basic, or catalytic conditions. In silicone rubbers and sealants, it serves as the primary base polymer for room-temperature vulcanizing (RTV) condensation-type silicone adhesives, mastics, and industrial sealants. In coatings, it is Utilized in epoxy resin modifications, pressure-sensitive adhesives, and superhydrophobic coatings to repel moisture. In textile industry, it is formulated into textile and leather finishing emulsions to give fabrics a soft, smooth, and water-resistant handle. In cosmetics and personal care, it is frequently integrated into shampoos, conditioners, and skincare formulations as a moisturizing, emollient, and antifoaming agent.


TERRAFLUID® OHP 80000

Hydroxyl-Terminated Polydimethylsiloxane

(CAS No. 70131-67-8)

Silanol-Terminated Polydimethylsiloxane (commonly known as Hydroxy-Terminated PDMS, Hydroxyl Silicone Oil, or OH-Polymer) with a viscosity of approx. 80000 mPa·s. It is a reactive silicone polymer consisting of a linear dimethylsiloxane chain capped with hydroxyl (-OH) groups at both ends. It is a colorless, odorless, and transparent viscous liquid. It is highly heat-stable, deeply flexible, possesses low surface tension, exhibits excellent hydrophobicity (water repellency), and carries low toxicity. The terminal silanol groups make it highly sensitive to condensation reactions, allowing it to easily crosslink under mild acidic, basic, or catalytic conditions. In silicone rubbers and sealants, it serves as the primary base polymer for room-temperature vulcanizing (RTV) condensation-type silicone adhesives, mastics, and industrial sealants. In coatings, it is Utilized in epoxy resin modifications, pressure-sensitive adhesives, and superhydrophobic coatings to repel moisture. In textile industry, it is formulated into textile and leather finishing emulsions to give fabrics a soft, smooth, and water-resistant handle. In cosmetics and personal care, it is frequently integrated into shampoos, conditioners, and skincare formulations as a moisturizing, emollient, and antifoaming agent.


​​​TERRAFLUID® VN 300

Vinyl-Terminated Polydimethylsiloxane

(CAS No. 68083-19-2)

Vinyl-Terminated Polydimethylsiloxane (commonly referred to as Vinyl Silicone Oil, Vi-PDMS, or Vinyldimethylsiloxy-Terminated Dimethyl Siloxanes) with a viscosity of approx. 300 mPa·s. It is a reactive silicone polymer consisting of a linear dimethylsiloxane backbone capped with vinyl (-CH=CH₂) functional groups at both ends. It is a colorless, odorless, and clear viscous liquid. It has excellent thermal stability, deep flexibility, low surface tension, high water repellency (hydrophobicity), and high resistance to chemical degradation. The terminal active double bonds make it highly effective for addition-cure reactions. Unlike silanol-terminated fluids, it cures primarily via platinum-catalyzed hydrosilylation (reacting with silicon-hydride crosslinkers) without generating any volatile or corrosive byproduct gases. In Liquid Silicone Rubber (LSR) and RTV-2, it serves as the fundamental base polymer for two-part addition-curing room temperature vulcanizing (RTV-2) and high-temperature vulcanizing (HTV) silicone elastomers. In Electronics Encapsulation, it is extensively used as a potting and encapsulating material to form a non-corrosive, moisture-proof, and dirt-resistant shield around delicate electrical components. In Molding & Mold Making, it is used to manufacture flexible, tear-resistant industrial molds and casting components due to its flawless replication of surface details. In Polymer Modifications, it is frequently copolymerized or reacted with polyurethane, acrylic acid, and organic resins to impart flexible, weather-resistant silicone traits to hybrid materials.


TERRAFLUID® VN 1000

Vinyl-Terminated Polydimethylsiloxane

(CAS No. 68083-19-2)

Vinyl-Terminated Polydimethylsiloxane (commonly referred to as Vinyl Silicone Oil, Vi-PDMS, or Vinyldimethylsiloxy-Terminated Dimethyl Siloxanes) with a viscosity of approx. 1000 mPa·s. It is a reactive silicone polymer consisting of a linear dimethylsiloxane backbone capped with vinyl (-CH=CH₂) functional groups at both ends. It is a colorless, odorless, and clear viscous liquid. It has excellent thermal stability, deep flexibility, low surface tension, high water repellency (hydrophobicity), and high resistance to chemical degradation. The terminal active double bonds make it highly effective for addition-cure reactions. Unlike silanol-terminated fluids, it cures primarily via platinum-catalyzed hydrosilylation (reacting with silicon-hydride crosslinkers) without generating any volatile or corrosive byproduct gases. In Liquid Silicone Rubber (LSR) and RTV-2, it serves as the fundamental base polymer for two-part addition-curing room temperature vulcanizing (RTV-2) and high-temperature vulcanizing (HTV) silicone elastomers. In Electronics Encapsulation, it is extensively used as a potting and encapsulating material to form a non-corrosive, moisture-proof, and dirt-resistant shield around delicate electrical components. In Molding & Mold Making, it is used to manufacture flexible, tear-resistant industrial molds and casting components due to its flawless replication of surface details. In Polymer Modifications, it is frequently copolymerized or reacted with polyurethane, acrylic acid, and organic resins to impart flexible, weather-resistant silicone traits to hybrid materials.


TERRAFLUID® VN 10000

Vinyl-Terminated Polydimethylsiloxane

(CAS No. 68083-19-2)

Vinyl-Terminated Polydimethylsiloxane (commonly referred to as Vinyl Silicone Oil, Vi-PDMS, or Vinyldimethylsiloxy-Terminated Dimethyl Siloxanes) with a viscosity of approx. 10000 mPa·s. It is a reactive silicone polymer consisting of a linear dimethylsiloxane backbone capped with vinyl (-CH=CH₂) functional groups at both ends. It is a colorless, odorless, and clear viscous liquid. It has excellent thermal stability, deep flexibility, low surface tension, high water repellency (hydrophobicity), and high resistance to chemical degradation. The terminal active double bonds make it highly effective for addition-cure reactions. Unlike silanol-terminated fluids, it cures primarily via platinum-catalyzed hydrosilylation (reacting with silicon-hydride crosslinkers) without generating any volatile or corrosive byproduct gases. In Liquid Silicone Rubber (LSR) and RTV-2, it serves as the fundamental base polymer for two-part addition-curing room temperature vulcanizing (RTV-2) and high-temperature vulcanizing (HTV) silicone elastomers. In Electronics Encapsulation, it is extensively used as a potting and encapsulating material to form a non-corrosive, moisture-proof, and dirt-resistant shield around delicate electrical components. In Molding & Mold Making, it is used to manufacture flexible, tear-resistant industrial molds and casting components due to its flawless replication of surface details. In Polymer Modifications, it is frequently copolymerized or reacted with polyurethane, acrylic acid, and organic resins to impart flexible, weather-resistant silicone traits to hybrid materials.


TERRAFLUID® DM 0.65

Hexamethyldisiloxane (INCI Name: Disiloxane)

(CAS No. 107-46-0)

Volatile silicone fluid with a viscosity of approx. 0.65 mm²/s.


TERRAFLUID® DM 1

Trisiloxane (INCI Name: Dimethicone)

(CAS No. 107-51-7)

Colorless, clear silicone fluid with high volatility and low viscosity of approx. 1 mm²/s. It is non-polar and insoluble in water but miscible with mineral oils, lower alcohols, esters, and other solvents frequently utilized in cosmetics. Due to its low heat of vaporization, TERRAFLUID® DM 1 evaporates from the skin without producing a cooling or stinging effect.


TERRAFLUID® DM 1.5

Decamethyltetrasiloxane (INCI Name: Dimethicone)

(CAS No. 141-62-8)

Colorless, clear silicone fluid with high volatility and low viscosity of approx. 1.5 mm²/s. It is non-polar and insoluble in water but miscible with mineral oils, lower alcohols, esters, and other solvents frequently utilized in cosmetics. Due to its low heat of vaporization, TERRAFLUID® DM 1.5 evaporates from the skin without producing a cooling or stinging effect.


TERRAFLUID® DM 2

Dodecamethylpentasiloxane (INCI Name: Dimethicone)

(CAS No. 63148-62-9)

Linear, non-reactive, unmodified polydimethylsiloxane with a viscosity of approx. 2 mm²/s. TERRAFLUID® DM 2 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.


TERRAFLUID® DM 3

Polydimethylsiloxane (INCI Name: Dimethicone)

(CAS No. 63148-62-9)

Linear, non-reactive, unmodified polydimethylsiloxane with a viscosity of approx. 6 mm²/s. TERRAFLUID® DM 6 silicone fluid is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.


TERRAFLUID® DM 5

Polydimethylsiloxane (INCI Name: Dimethicone)

(CAS No. 63148-62-9)

Linear, non-reactive, unmodified polydimethylsiloxane with a viscosity of approx. 5 mm²/s. TERRAFLUID® DM 5 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.


TERRAFLUID® DM 6

Polytdimethylsiloxane (INCI Name: Dimethicone)

(CAS No. 63148-62-9)

Linear, non-reactive, unmodified polydimethylsiloxane with a viscosity of approx. 6 mm²/s. TERRAFLUID® DM 6 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.


TERRAFLUID® DM 10

Polydimethylsiloxane (INCI Name: Dimethicone)

(CAS No. 63148-62-9)

Linear, non-reactive, unmodified polydimethylsiloxane with a viscosity of approx. 10 mm²/s. TERRAFLUID® DM 10 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.


TERRAFLUID® DM 20

Polydimethylsiloxane (INCI Name: Dimethicone)

(CAS No. 63148-62-9)

Linear, non-reactive, unmodified polydimethylsiloxane with a viscosity of approx. 20 mm²/s. TERRAFLUID® DM 20 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.


TERRAFLUID® DM 35

Polydimethylsiloxane (INCI Name: Dimethicone)

(CAS No. 63148-62-9)

Linear, non-reactive, unmodified polydimethylsiloxane with a viscosity of approx. 35 mm²/s. TERRAFLUID® DM 35 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.


TERRAFLUID® DM 50

Polydimethylsiloxane (INCI Name: Dimethicone)

(CAS No. 63148-62-9)

Linear, non-reactive, unmodified polydimethylsiloxane with a viscosity of approx. 50 mm²/s. TERRAFLUID® DM 50 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.


TERRAFLUID® DM 100

Polydimethylsiloxane (INCI Name: Dimethicone)

(CAS No. 63148-62-9)

Linear, non-reactive, unmodified polydimethylsiloxane with a viscosity of approx. 100 mm²/s. TERRAFLUID® DM 100 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.


TERRAFLUID® DM 150

Polydimethylsiloxane (INCI Name: Dimethicone)

(CAS No. 63148-62-9)

Linear, non-reactive polydimethylsiloxane with a viscosity of approx. 150 mm²/s. TERRAFLUID® DM 150 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.


TERRAFLUID® DM 200

Polydimethylsiloxane (INCI Name: Dimethicone)

(CAS No. 63148-62-9)

Linear, non-reactive polydimethylsiloxane with a viscosity of approx. 200 mm²/s. TERRAFLUID® DM 200 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.


TERRAFLUID® DM 250

Polydimethylsiloxane (INCI Name: Dimethicone)

(CAS No. 63148-62-9)

Linear, non-reactive polydimethylsiloxane with a viscosity of approx. 250 mm²/s. TERRAFLUID® DM 250 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.


TERRAFLUID® DM 300

Polydimethylsiloxane (INCI Name: Dimethicone)

(CAS No. 63148-62-9)

Linear, non-reactive polydimethylsiloxane with a viscosity of approx. 300 mm²/s. TERRAFLUID® DM 300 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.


TERRAFLUID® DM 350

Polydimethylsiloxane (INCI Name: Dimethicone)

(CAS No. 63148-62-9)

Linear, non-reactive polydimethylsiloxane with a viscosity of approx. 350 mm²/s. TERRAFLUID® DM 350 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.


TERRAFLUID® DM 500

Polydimethylsiloxane (INCI Name: Dimethicone)

(CAS No. 63148-62-9)

Linear, non-reactive polydimethylsiloxane with a viscosity of approx. 500 mm²/s. TERRAFLUID® DM 500 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.


TERRAFLUID® DM 750

Polydimethylsiloxane (INCI Name: Dimethicone)

(CAS No. 63148-62-9)

Linear, non-reactive polydimethylsiloxane with a viscosity of approx. 750 mm²/s. TERRAFLUID® DM 750 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.


TERRAFLUID® DM 1000

Polydimethylsiloxane (INCI Name: Dimethicone)

(CAS No. 63148-62-9)

Linear, non-reactive polydimethylsiloxane with a viscosity of approx. 1000 mm²/s. TERRAFLUID® DM 1000 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.


TERRAFLUID® DM 5000

Polydimethylsiloxane (INCI Name: Dimethicone)

(CAS No. 63148-62-9)

Linear, non-reactive polydimethylsiloxane with a viscosity of approx. 5000 mm²/s. TERRAFLUID® DM 5000 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.


TERRAFLUID® DM 10000

Polydimethylsiloxane (INCI Name: Dimethicone)

(CAS No. 63148-62-9)

Linear, non-reactive polydimethylsiloxane with a viscosity of approx. 10000 mm²/s. TERRAFLUID® DM 10000 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.


TERRAFLUID® DM 12500

Polydimethylsiloxane (INCI Name: Dimethicone)

(CAS No. 63148-62-9)

Linear, non-reactive polydimethylsiloxane with a viscosity of approx. 12500 mm²/s. TERRAFLUID® DM 12500 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.


TERRAFLUID® DM 20000

Polydimethylsiloxane (INCI Name: Dimethicone)

(CAS No. 63148-62-9)

Linear, non-reactive polydimethylsiloxane with a viscosity of approx. 20000 mm²/s. TERRAFLUID® DM 20000 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.


TERRAFLUID® DM 50000

Polydimethylsiloxane (INCI Name: Dimethicone)

(CAS No. 63148-62-9)

Linear, non-reactive polydimethylsiloxane with a viscosity of approx. 50000 mm²/s. TERRAFLUID® DM 50000 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.


TERRAFLUID® DM 60000

Polydimethylsiloxane (INCI Name: Dimethicone)

(CAS No. 63148-62-9)

Linear, non-reactive polydimethylsiloxane with a viscosity of approx. 60000 mm²/s. TERRAFLUID® DM 60000 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.


TERRAFLUID® DM 100000

Polydimethylsiloxane (INCI Name: Dimethicone)

(CAS No. 63148-62-9)

Linear, non-reactive polydimethylsiloxane with a viscosity of approx. 100000 mm²/s. TERRAFLUID® DM 100000 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.


TERRAFLUID® DM 250000

Polydimethylsiloxane (INCI Name: Dimethicone)

(CAS No. 63148-62-9)

Dimethyl silicone fluid with a viscosity of approx. 250000 mm²/s. TERRAFLUID® DM 250000 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.


TERRAFLUID® DM 300000

Polydimethylsiloxane (INCI Name: Dimethicone)

(CAS No. 63148-62-9)

Dimethyl silicone fluid with a viscosity of approx. 300000 mm²/s. TERRAFLUID® DM 300000 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.


TERRAFLUID® DM 500000

Polydimethylsiloxane (INCI Name: Dimethicone)

(CAS No. 63148-62-9)

Dimethyl silicone fluid with a viscosity of approx. 500000 mm²/s. TERRAFLUID® DM 500000 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.


TERRAFLUID® DM 600000

Polydimethylsiloxane (INCI Name: Dimethicone)

(CAS No. 63148-62-9)

Dimethyl silicone fluid with a viscosity of approx. 600000 mm²/s. TERRAFLUID® DM 600000 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.


TERRAFLUID® DM 750000

Polydimethylsiloxane (INCI Name: Dimethicone)

(CAS No. 63148-62-9)

Dimethyl silicone fluid with a viscosity of approx. 750000 mm²/s. TERRAFLUID® DM 750000 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.


TERRAFLUID® DM 1000000

Polydimethylsiloxane (INCI Name: Dimethicone)

(CAS No. 63148-62-9)

Dimethyl silicone fluid with a viscosity of approx. 1000000 mm²/s. TERRAFLUID® DM 1000000 is characterized by low surface tension and a high spreading coefficient. Due to their flexible polymer backbone, dimethicones have high permeability to gases (e.g. water vapor, oxygen), which allows respiration of the skin.


TERRASIL® SWA 3400

Super Spreader & Wetting Agent

Non-ionic surfactant for improving wetting and spreading performances of the liquids. High concentrated, it can be easily dispersed in water and solvents.


TERRASIL® SWA 4400

Super Spreader & Wetting Agent

Non-ionic surfactant for improving wetting and spreading performances of the liquids. High concentrated, it can be easily dispersed in water and solvents.


TERRASIL® RSN 1600 MQ

Silicone MQ Resin (Alkylsilicone Resin)

Pure white powder silicone resin. It can be compounded with polydimethylsiloxanes or dissolved in appropriate solvents like aromatic and non-aromatic hydrocarbons or lower alcohols. The solubility is excellent.


TERRASIL® 1100 SILANE

3-Aminopropyltriethoxysilane

(CAS No. 919-30-2)

Additive to provide and increase adhesion. To achieve a permanent effect when used with elastomeric silicone emulsion in the manufacture of glass wool and rock wool thermal insulation materials.


TERRASIL® 1110 SILANE

3-Aminopropyltrimethoxysilane

(CAS No. 13822-56-5)

Additive to provide and increase adhesion. To achieve a permanent effect when used with elastomeric silicone emulsion in the manufacture of glass wool and rock wool thermal insulation materials.


TERRASIL® 1146 SILANE

Propyltrimethoxysilane

(CAS No. 1067-25-0)

Diaminofunctional silane. It may be used as an additive or as a primer in adhesives and sealants, and in coatings applications. In adhesives and sealants, and in coatings, it is used to improve the adhesion of amino-reactive resins (e.g. RTV-silicones, two-part urethanes, silylated urethanes, MS polymers, and two-part epoxies) to inorganic surfaces (e.g. concrete, aluminum), plastic surfaces (e.g. PVC), and inorganic fillers.


TERRASIL® 1200 SILANE

Aminoethylaminopropyltrimethoxysilane

(CAS No. 1760-24-3)

Additive to provide and increase adhesion. To achieve a permanent effect when used with elastomeric silicone emulsion in the manufacture of glass wool and rock wool thermal insulation materials.


TERRASIL® 1210 SILANE

Aminoethylaminopropyltriethoxysilane

(CAS No. 5089-72-5)

Adhesion promoter, coupling agent and cross-linking additive.


TERRASIL® 1220 SILANE

Aminoethylaminopropylmethyldimethoxysilane

(CAS No. 3069-29-2)

Adhesion promoter and coupling agent. To achieve long-lasting effect when used with elastomeric silicone emulsion.


TERRASIL® 2300 SILANE

3-Mercaptopropyltrimethoxysilane

(CAS No. 4420-74-0)

Adhesion promoter, coupling agent and cross-linking additive. 


TERRASIL® 3100 SILANE

3-Glycidoxypropyltrimethoxysilane

(CAS No. 2530-83-8)

Adhesion promoter, coupling agent and cross-linking additive. 


TERRASIL® 4100 SILANE

3-Methacryloxypropyltrimethoxysilane

(CAS No. 2530-85-0)

Adhesion promoter, coupling agent and cross-linking additive. 


TERRASIL® 5131 SILANE

Methytrimethoxysilane (MTMS)

(CAS No. 1185-55-3)

Adhesion promoter, coupling agent and cross-linking additive. 


TERRASIL® 5132 SILANE

Methytrimethoxysilane (MTES)

(CAS No. 2031-67-6)

Adhesion promoter, coupling agent and cross-linking additive. 


TERRASIL® 5220 SILANE

Dimethyldichlorosilane (DMDCS)

(CAS No. 75-78-5)

Adhesion promoter, coupling agent and cross-linking additive. 


TERRASIL® 5420 SILANE

Tetraethoxysilane (TEOS-28)

(CAS No. 78-10-4)

Adhesion promoter, coupling agent and cross-linking additive. 


TERRASIL® 5424 SILANE

Ethylpolysilicate 40 (TEOS-40)

(CAS No. 11099-06-2)

Adhesion promoter, coupling agent and cross-linking additive.


TERRASIL® 5902 SILANE

N-octyltriethoxysilane

(CAS No. 2943-75-1)

Triethoxy(octyl)silane. Additive that provides water repellency, water impermeability, binding and adhesion on mineral-based and inorganic surfaces.


TERRASIL® 5931 SILANE

Propyltrimethoxysilane 

(CAS No. 1067-25-0)

Additive to provide and increase adhesion. Especially for the production of RTV silicone sealant, epoxy resin, polyurethane and MS polymer based adhesives and sealants.


TERRASIL® 6100 SILANE

Vinyltrichlorosilane

(CAS No. 75-94-5)

Adhesion promoter, coupling agent and cross-linking additive.


TERRASIL® 6110 SILANE

Vinyltrimethoxysilane

(CAS No. 2768-02-7)

Adhesion promoter, coupling agent and cross-linking additive.


TERRASIL® 6120 SILANE

Vinyltriethoxysilane

(CAS No. 78-08-0)

Adhesion promoter, coupling agent and cross-linking additive.


TERRASIL® 6130 SILANE

Vinyltris(2-methoxyethoxy)silane

(CAS No. 1067-53-4)

Adhesion promoter, coupling agent and cross-linking additive.


TERRASIL® 7130 SILANE

Methyltris(methylethylketoxime)silane (MOS)

(CAS No. 22984-54-9)

Adhesion promoter, coupling agent and cross-linking additive.


TERRASIL® 7500 SILANE

Vinyltris(methylethylketoxime)silane (VOS)

(CAS No. 2224-33-1)

Adhesion promoter, coupling agent and cross-linking additive. 


TERRASIL® 7930 SILANE

Methyltriacetoxysilane (MTAS)

(CAS No. 4253-34-3)

Adhesion promoter, coupling agent and cross-linking additive.


TERRASIL® 7950 SILANE

Ethyltriacetoxysilane (ETAS)

(CAS No. 17689-77-9)

Adhesion promoter, coupling agent and cross-linking additive. 


TERRASIL® 7970 SILANE

Propyltriacetoxysilane (PTAS)

(CAS No. 17865-07-5)

Adhesion promoter, coupling agent and cross-linking additive.


TERRASIL® 2020 CATALYST

Dibutyltin Dilaurate (DBTDL)

(CAS No. 77-58-7)

Dibutyltin Dilaurate. It is used to cross-link two-component urethane coating systems for the automotive, industrial, and refinish coatings; to cross-link RTV silicone systems for the caulkand sealants markets; and, also, to cross-link polyethylene/silane co-polymer systems for the wire and cable industry. Absorbed on silica, it is used to cross-link urethane powder coatings for exterior applications. It can be used as a gelling catalyst in the manufacture of flexible and rigid polyurethane foams, coatings, adhesives, sealants and elastomers.


TERRASIL® 3020 CATALYST

Dibutyltin Diacetate

(CAS No. 1067-33-0)

Dibutyltin Diacetate. It is used as curing agent in RTV silicone sealant formulations. It is used as the catalyst for condensation-curing type, two-component room-temperature-vulcanizing RTV-2 silicone rubber systems.


Holcosil® IP

Pigment Paste

Liquid Pigment Paste. For producing acetoxy, alkoxy, oxime or MS Polymer type RTV silicone sealant, oil based, high concentration, excellent coating peformance, easy dispersible.


Holcoflex®

Pigment Paste

Liquid Pigment Paste. For producing polyurtehane, polysulfide, MS Polymer or hybride type selant and adhesive, oil based, high concentration, excellent coating performance, easy dispersible.


Holcolex®

Pigment Paste

Liquid Pigment Paste. For producing acrylic resin based sealant and adhesive, water based, high concentration, excellent coating  performance, easy dispersible.


HDK® H15

Pyrogenic Silica (Silicone Dioxide)

(CAS No. 68611-44-9)

Synthetic, hydrophobic, amorphous silica. High purity, in white color.


HDK® N20

Pyrogenic Silica (Silicone Dioxide)

(CAS No. 112945-52-5)

Synthetic, hydrophilic, amorphous silica. High purity, in white color.


 

APPLICATIONS


>  RTV Silicone Sealant

>  Acrylic Sealant

>  Polyurethane Sealant

>  Polysulfide Sealant

>  MS Polymer Sealant

>  Hybride Sealant

>  Adhesives & Glues

>  Industrial Adhesives

>  High Strength Adhesives

>  Hot Melt Adhesives

>  Bonding Agents

>  Adhesive Films & Tapes

>  Pressure Sensitive Adhesive (PSA)

>  Coatings

>  Primers

SOLUTIONS FOR PROFESSIONALS